Tube Axial Duct Fan Blower - Belt Drive Model B

TUBE AXIAL DUCT FAN BLOWER - BELT DRIVE MODEL B (request a quote)

×
×
Price:
Request a quote below and be sure to let us know any additional specifications required for your facility.
(price varies based on selections below)
Description
Reviews
Related Products
Product Videos
Warranty
Also Viewed
By Category
Other Details
  • Product Description

    Tube Axial Duct Fan Blower - Model B

    The ultimate in positive elimination of smoke, fume, and vapors through duct work in paint spray booths and other hazardous locations. Recommended for use in dry environments with temperature less than 180°.

    Up to 1 1/4" static pressure or up to 25,600 CFM.

    OUTSTANDING FEATURES:

    • Fan blowers can be installed to operate in any position.
    • Propellers non-sparking cast aluminum (steel available on request).
    • Fan Blower Housing is heavy gauge steel with angle iron rings welded on each end of superior strength. Eight holes in angle rings for easy mounting.
    • Air tight cylinder in center of drum protects belts, sheaves, and bearings from contaminated air.
    • Adjustable motor base provides for proper belt tension.
    • Bearings – two sealed industrial grade ball bearings mounted in a precision machined, cast aluminum, one piece, completely enclosed bearing housing for exceptional bearing life. External grease fitting is standard.
    • Motors – only high quality industrial motors are used. Fans with motors are completely assembled, drives properly adjusted and fan tested at factory before shipping.


    OPTIONS AND ACCESSORIES:

    COMPANION FLANGES – For easy installation of duct fans.

    PROTECTIVE COATINGS – Epoxy and Eisenheiss coatings provide good protection against most corrosive agents.

    VARIABLE PITCH PULLEYS – Allow for moderate variation of fan speed for flexibility and system modification.

    ACCESS DOORS – Hinged access doors, gasketed and latched, provide for periodic inspections.

    BELT GUARDS – Adjustable, galvanized construction.

    MOTOR COVERS – Galvanized, designed to fit all belt drive tube axial duct fans. (Specify motor frame size.)

    FAN GUARDS – ½” O.S.H.A. approved safety guards for use on fan inlet or outlet.

    DID YOU KNOW?  We can customize products based on custom flow and pressure conditions to suit your application.  Don't see what you're looking for?  Chat with us or call for other options.

     

    Models available:  

    12”   B-12-1/6  |  B-12-1/4  |  B-12-1/3  |  B-12-1/2  |  B-12-3/4 
    15”   B-15-1/4  |  B-15-1/3  |  B-15-1/2  |  B-15-3/4
    18”   B-18-1/4  |  B-18-1/3  |  B-18-1/2  |  B-18-1  |  B-18-1 1/2  
    24”   B-24-1/2  |  B-24-3/4  |  B-24-1  |  BPR-24-1  |  BPR-24-1 1/2  |  BPR-24-2  |  B-24-2  |  B-24-3/4
    27”   BPR-27-3/4  |  BPR-27-1  |  BPR-27-1 1/2  |  BPR-27-2  
    30”   B-30-1/2  |  B-30-1  |  BPR-30-1 1/2  |  BPR-30-2  |  B-30-3  |  B-30-5  
    34”   B-34-1 1/2  |  B-34-2  |  B-34-3  |  B-34-5  
    42”   BPR-42-1 1/2  |  BPR-42-2  |  BPR-42-3  |  BPR-42-5

    Please note:  All products on this site are made to order, non-returnable, and non-refundable.  Please see our Returns Policy below for more information.

  • Product Reviews

    ×

    This product hasn't received any reviews yet. Be the first to review this product!

    Write A Review

  • Find Similar Products by Category

  • Other Details

    ESTIMATED LEAD TIME: 10 working days
×
×