- Shop All
- Fans and Blowers
- Parts and Accessories
- Dust Collectors
- Repair & Field Service
Tube Axial Duct Fan Blower - Direct Drive Model DF
HEAVY GAUGE ALL WELDED STEEL CONSTRUCTION. EASILY MOUNTED INTO DUCT.
APPLICATION – These direct drive tube axial fan blowers are recommended for duct application in mills, mines, foundries, factories or wherever fumes, dust, smoke, or steam must be removed.
Propellers are non-sparking cast aluminum so that unit with explosion proof motor can be used to handle explosive gases.
Drum made from heavy gauge steel. Welded construction. Angle iron flanges on each end of drum with eight mounting holes for ease in mounting into duct.
Motors – only high quality industrial motors are used. Fans with motors are completely assembled and fan tested at factory before shipping. Motors are available in open drip proof, TEFC (Totally Enclosed, Fan Cooled), and EXP (Explosion Proof).
Model DF fans may be specified for any application where it is permissible to allow the motor to run in the air stream.
Up to 1 1/4" static pressure or up to 21,000 CFM.
ACCESSORIES AND OPTIONS:
COMPANION FLANGES – For easy installation.
DID YOU KNOW? We can customize products based on custom flow and pressure conditions to suit your application. Don't see what you're looking for? Chat with us or call for other options.
12” DF-12-1/4 | DF-12-1/2 | DF-12-3/4
18” DF-18-1/4 | DF-18-1/3 | DF-18-1/2 | DF-18-1
24” DF-24-1/4 | DFL-24-1/3 | DFL-24-1/2 | DFL-24-3/4 | DF-24-1 | DF-24-2 | DF-24-3
27” DF-27-1/2 | DF-27-1 | DF-27-2
30” DF-30-1/2 | DFL-30-3/4 | DF-30-2 | DFL-30-2 | DF-30-3
34” DF-34-1 1/2 | DF-34-2 | DFL-34-2 | DFL-34-3 | DF-34-5
36” DFL-36-2 | DF-36-3 | DFL-36-3
42” DFLL-42-1 | DFL-42-2 | DFLL-42-2
Please note: All products on this site are made to order, non-returnable, and non-refundable. Please see our Returns Policy below for more information.
|ESTIMATED LEAD TIME:||7 - 14 working days|