Tube Axial Duct Fan Blower - Belt Drive - Model BCS - Product Dimensions

TUBE AXIAL DUCT FAN BLOWER - BELT DRIVE MODEL BCS (request a quote)

×
×
Price:
Request a quote below and be sure to let us know any additional specifications required for your facility.
(price varies based on selections below)
Condition:
New
Description
Reviews
Related Products
Product Videos
Warranty
Also Viewed
By Category
Other Details
  • Product Description

    Tube Axial Duct Fan Blower - Model BCS

    Ball bearing pillow block construction designed specifically for applications moving air with high moisture content. Suitable for spray booths, ducts, industrial washing machines.

    Up to 1 1/2" static pressure or up to 51,900 CFM.

    OUTSTANDING FEATURES

    • Sealed ball bearings with external grease fittings.
    • Fan blower can be installed in any position.
    • Propellers non-sparking cast aluminum
    • Fan blower housing is heavy gauge steel with angle iron rings welded on each end for superior strength. Eight holes in angle rings for easy mounting.
    • Standard constructions 225°F. Temperatures up to 375°F with special construction.
    • Motors – only high quality industrial motors are used. Fans with motors are completely assembled, drives properly adjusted, and fan tested at the factory before shipping. Motors are available in open drip proof, totally enclosed, and explosion proof.
    • Cast steel and turned steel sheaves.
    • Adjustable motor base.
    • Bearings are located in the belt tube, removed from the contaminated airstream. Belt tube interior is protected from contaminated air in duct by water slinger, dust cover, and shaft seals.

    NOTE: Bearings must be protected by weather cover or other means from contaminated air, exterior to the fan, at installation.

    OPTIONS AND ACCESSORIES:

    COMPANION FLANGES – For easy installation of duct fans.

    PROTECTIVE COATINGS – Epoxy and Eisenheiss coatings provide good protection against most corrosive agents.

    VARIABLE PITCH PULLEYS – Allow for moderate variation of fan speed for flexibility and system modification.

    ACCESS DOORS – Hinged access doors, gasketed and latched, provide for periodic inspections.

    BELT GUARDS – Adjustable, galvanized construction.

    MOTOR COVERS – Galvanized, designed to fit all belt drive tube axial duct fans. (Specify motor frame size.)

    FAN GUARDS – ½” O.S.H.A. approved safety guards for use on fan inlet or outlet.

    DID YOU KNOW?  We can customize products based on custom flow and pressure conditions to suit your application.  Don't see what you're looking for?  Chat with us or call for other options.

     

    Models available:  

    12”   B-12-1/2-CS  |  B-12-3/4-CS  
    15”  
    B-15-3/4-CS  |  B-15-1-CS
    18”   B-18-1/2-CS  |  B-18-1-CS  |  B-18-1 1/2-CS  
    24”   B-24-1/2-CS  |  B-24-3/4-CS  |  B-24-1-CS  |  BPR-24-1-CS  |  BPR-24-1 1/2-CS  |  BPR-24-2-CS  |  B-24-2-CS  |  B-24-3-CS  |  B-24-5-CS  
    27”   BPR-27-3/4-CS  |  BPR-27-1-CS  |  BPR-27-1 1/2-CS  |  BPR-27-2-CS  |  B-27-3-CS
    30”   BPR-30-1 1/2-CS  |  BPR-30-2-CS  |  B-30-3-CS  |  B-30-5-CS
    34”   B-34-2-CS  |  B-34-3-CS  |  B-34-5-CS  
    36”   BPR-36-3-CS  |  BPR-36-5-CS  |  BPR-36-7 1/2-CS  
    42”   BPR-42-2-CS  |  BPR-42-3-CS  |  BPR-42-5-CS  |  BPR-42-7 1/2-CS  |  BPR-42-10-CS  
    48”   BPR-48-5-CS  |  BPR-48-7 1/2-CS  |  BPR-48-10-CS  
    60”   BPR-60-5-CS  |  BPR-60-7 1/2-CS  |  BPR-60-10-CS

    Please note:  All products on this site are made to order, non-returnable, and non-refundable.  Please see our Returns Policy below for more information.

  • Product Reviews

    ×

    This product hasn't received any reviews yet. Be the first to review this product!

    Write A Review

  • Find Similar Products by Category

  • Other Details

    ESTIMATED LEAD TIME: 10 working days
×
×